Bishop Ranch
J Miller Canvas LLC Santa Ana, CA - Award of Excellence
This is a freestanding low profile shade structure with lights WiFi and power outlets.
This is a freestanding low profile shade structure with lights WiFi and power outlets.
This is a free standing steel structure with tension panels set into a sub frame uses open weave Sunworker fabric by Dicson to create a comfortable space allowing tenants to work outdoors, hold casual meetings or events at this high end office complex.
The installation at Cotton Center Building 19 included three cantilevered 14x14 shade-sail-style GORILLABrellas that provide a total of 534 square feet of shade. In contrast to a standard cantilevered GORILLABrella, these structures have two support arms at an upward angle and two at a downward angle, creating a 20% twist in the shade canopy mounted …
The City of Honolulu revamped our world-famous Ala Moana beach park in an effort to renovate Hawaii's most loved beach. One of their improvements was the construction of a new comfort station that included a beautiful covered outdoor shower under a freestanding tensile canopy.
This project consists of one shade structure made up of four columns connected by a steel frame around the top, and two layered shade sails.
This is a freestanding low profile shade structure with lights WiFi and power outlets.
These are 10 separate custom shade structures designed for a local theme park queuing line.
Foster Park playground is part of Selwyn District Councils major new sport and recreation park development for the town of Rolleston and greater Selwyn area. With the community using the playground for education, sport and recreation large static shade areas were required to enhance this experience.
These are trapezoid shaped tension umbrellas with built in up & down lights.
As part of a redeveleopment project for the Joan Kirner Hospital project in St Alban, Victoria Australia, a series of circular and semi-circular shade structures were constructed to improve the facilities at the children's hospital. Funded by the Victoria State Government, the external shade canopies are made from custom architectural steel in full circular and …
Recover gable style entrance stair step canopy measuring 10’ wide x 68’ projection. Fabric is Ferrari 502 Moss Green.
A square shaped gazebo needed to be covered, with fabric that would reduce the heat and kept within the aesthetics of the resort
Four freestanding cantilevered Convex style fabric canopies fabricated and installed at a country club pool area. One freestanding structure is 30’ wide x 10’ projection installed on 4 rear 6” steel posts. Three freestanding structures each measuring 12’ wide x 10’ projection and installed on 2 rear 6” steel posts. The fabric is Ferrari Soltis …
This project was comprised of three separate shade structures in two neighboring areas of the Reid Park Zoo. Two 14x14 GORILLABrellas, which each provide 185 square feet of shade, were installed in the zoo’s Meerkat exhibit, and a third custom extended umbrella structure was installed over a pool in the river otter enclosure. This structure …
This project is a custom designed 16' x 11' + hip-roof style free standing awning with four (4) 6" x 6" columns plated to a concrete deck. The aluminum frame was powder coated for the appearance of a wood grain finish. The material on top of the structure is water-proof vinyl. One side of the …
The project was to design and install three shade structures at a new playground in Ryde Sydney. The three structures are 38sm each to total 114sm. The shade structures are located at Ryde Outdoor Youth Space 96 Constitution Road West Meadowbank 2114 The client Ryde Council, like many other councils is developing some magnificent playgrounds …
A freestanding sunfly 24'x 8'6 in Stamoid top "sand" color, with welded seams ( we used a miller t300 extreme hot wedge welder), with 8 telescoping Stainless sunfly poles (by Canvas Designers Inc) with 4 height adjustments within 36" of travel, 3 front rollup clear Regalite vinyl windows , and 3 sides of rollup up …
These are small free standing tension umbrellas with interior LED lighting.
This is a free standing steel structure with tension panels set into a sub frame uses open weave Sunworker fabric by Dicson to create a comfortable space allowing tenants to work outdoors, hold casual meetings or events at this high end office complex.
One custom hip and ridge structure measuring 20 feet by 40 feet with a 14 foot tall entry.